Dymet Alloys manufacture a wide range of solid and Tungsten Carbide Wear Resistant Components and Hard Facings.
Dymet has a wide experience in the manufacture of solid and sleeved Rollers, Slippers, Slipper Ends, Cheek Plates, Curved & Flat Guide Rails, Wear Plates and Mould Liners.
Dymet offer special wear resistant grade tungsten carbide grades for use on individual components and piece parts. Components can be supplied brazed, glued or mechanically retained on to steel backings.
In-house grinding facilities including Wire Cut EDM mean that items can be supplied fully ground to customer drawing. |
|
 |
Our facilities and expertise allow us to offer:
- Individual grade powders including sub-micron blended in house using quality raw materials.
- Cobalt and Nickel binders for a wide range of individual applications.
- Components manufactured by automatic and isostatic pressing.
- Shaped profiles from pre-sintered blocks, sleeves and bushes.
- Individual sizes up to 200mm (8" inch) diameter and 50 kg in weight.
- In-house Sinter-HIP and Vacuum sintering to control material composition.
- Induction brazing, gluing and shot peening facilities
|
Dymet Alloys supply the following items in either solid or sleeved Tungsten Carbide or in conjunction with brazed, glued or mechanically retained steel hubs and backings.
- Brick Mould & Refractory Liners
- Wear Plates, Tracks & Tips
- Crusher Blocks & Inserts
- Large & Small Slippers/Thicknessers
- Small Profiled Rollers & Slippers
- Segmented Rollers
- Curved & Flat Guide Rails
|
 |
|
